Projects

YStreamer

Your FPV feed, on every screen.

Turns a Raspberry Pi 4 into a streaming box for your DJI goggles. Plug them in over USB-C and send the live feed to an HDMI screen, any browser, streaming platforms and recordings - all at once, set up from a web interface.

• HDMI output with your own logo overlay
• RTSP, SRT, RTMP, UDP, NDI and in-browser live view
• Change air unit camera settings from the browser

ShutterBridge

Your camera on the OSD. Your switches on the shutter.

ESP32 firmware that links your Betaflight flight controller to your action camera over Bluetooth. See record status, battery and SD space in your goggles, and control the camera from your radio - no touching it before takeoff.

• Start recording on arm, stop on disarm
• Camera status drawn right on your Betaflight OSD
• Flash from the browser and configure from a Web UI

YMapper

Mapping missions for DJI drones, in a few clicks.

Plan automatic survey and photogrammetry missions for DJI drones with waypoints. Draw the area on the map, pick your drone and camera, and export a mission ready for DJI Fly or Litchi.

• Works with DJI Fly (Mini 4/5 Pro, Air 3/3S, Mavic 3/4)
• Litchi export for older DJI drones
• Runs in the browser, on Windows, macOS, Linux and Android

Betaflight Remote

Your quad, configured from anywhere.

Remote Betaflight help over the web - like TeamViewer, but for a flight controller. Plug your FC into the browser, share a code, and someone you trust configures your quad from anywhere using the official Betaflight Configurator.

• Nothing to install - runs in Chrome or Edge
• Your helper uses the official Betaflight Configurator
• Works behind any router, no port forwarding